Unifix knowledge database - The original one

Dashboard - News - Search - List - About - Admin


Cisco 1760 Config with CyberCity G.SHDSL Config

Author:black - Thu Oct 25 23:58:41 2007

! To Apply this config, alter the following things:
! * CyberCity DSL Password
! * Telnet Password
! * Enable password
! * Access-list for telnet access.
! 
! Then paste the commands into the console terminal, 
! after going to terminal config mode
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname bgw.sk.mcn.dk
!
enable secret FooBar
!
ip subnet-zero
no ip finger
no ip source-route
no ip domain-lookup
!
ip dhcp excluded-address 85.82.26.160 85.82.26.179
!
ip dhcp pool 0
 import all
 origin ipcp
 dns-server 212.242.40.3 212.242.40.51
exit
!
!NO IOSFW ENABLED
!
interface FastEthernet0/0
 ip address pool 0
 no ip route-cache
 ip access-group 120 in
 !No NAT overload with GlobalIP
 !NO IOSFW ENABLED
 no shutdown
exit
!
! NO EXTRA INTERFACES
interface Ethernet1/0
 no ip address
 no ip route-cache
 shutdown
exit
!
interface ATM0/0
 no ip address
 no ip route-cache
 no atm ilmi-keepalive
 pvc 0/35
  encapsulation aal5mux ppp dialer
  dialer pool-member 1
 exit
 !
 bundle-enable
 dsl equipment-type CPE
 dsl operating-mode GSHDSL symmetric annex B
 dsl linerate AUTO
 hold-queue 224 in
 no shutdown
exit
!
interface Dialer0
 no ip route-cache
 encapsulation ppp
 dialer pool 1
 dialer-group 1
 ppp authentication chap callin optional
 ppp chap hostname dsl123456
 ppp chap password FooBarPass
 ip unnumbered FastEthernet0/0
 ppp ipcp mask request
 !No NAT overload with GlobalIP
 !NO ACL110
 no shutdown
exit
!
!No NAT overload with GlobalIP
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0 permanent
!No MPLS enabled
!
no access-list 1
no access-list 5
no access-list 10
no access-list 101
no access-list 110
no access-list 111
no access-list 120
!
! Addresses in RIP update
!NO ACL1
!
! Addresses allowed to access vty (telnet)
!access-list 5 permit 212.242.40.0 0.0.3.255
! LAN is allowed
access-list 5 permit 85.82.26.160 0.0.0.31
! Random host allow
! access-list 5 permit 10.20.30.40
!
! Special Java list
!NO ACL10
! 
! Addresses to be NAT'ed.
!No NAT overload with GlobalIP
!
! Packets permited in on dialer0.
!NO ACL110
! 
! Packets allowed in on the ethernet.
access-list 120 permit udp any any range bootps bootpc
access-list 120 permit ip 85.82.26.160 0.0.0.31  any 
!
! Packets allowed to trigger a call.
dialer-list 1 protocol ip  permit
!
line con 0
 transport output none
 stopbits 1
exit
line vty 0 4
 password FooBar
 access-class 5 in
 login
exit
!
scheduler max-task-time 5000
!
config-register 0x2102
end
! After this, do a wri mem if the config works..
Copyright(c) Unifix.org 2002-2011


Dashboard - News - Search - List - About - Admin
 
Powered by Mikjaer Consulting Solutions - Hosted by Specialhosting.dk